• It is used to check the diaphragm leakage of Inline and VE distributor pumps of all makes including Bosch / Denso etc.
• It can be used to check the movement of diaphragm whose function is to increase the output delivery of the pump when the vehicle is overloaded ( In case of driving uphill etc.)
• Excellent Quality Assured

• Used for testing and calibrating of Inline / P type pumps. 
• These Injectors are compatible with all Diesel Fuel Injection Pump Test benches / Test Stands. 
• All injectors fitted with genuine Bosch DN 12 SD 12 Nozzles preset at 175 Bar +/- 2 Bar opening Pressure. 
• Come with Six high pressure pipes ( 6mm OD and 2mm ID , Length - 450 mm / 18 Inches approx. ) with A type (M 12 X 1.5) and B type (M 14 X 1.5) nuts as per Bosch standard. 
• 100 % Results can be obtained as per Bosch Master Pump i.e. Delivery = 25 cc +/- 0.25 cc when the test bench is set at 500 strokes at 1000 RPM. 
• Made out of special forged steel, heat treated as per Bosch standards.
• Excellent quality and performance assured.

Model: 360 Deg. Rotatable with Diesel FIP Mounting Plate

Set of Six

High Pressure Pipes with Adapters for Test Benches comprise a set of six high pressure pipes with adapter support that find suitability for both 'A' type as well as 'B' type diesel fuel injection pumps. Here, the offered pipes are suitable for 'A' type pumps with nuts of ( M 12 X 1.5 ) X (M 14 X 1.5) thread support as well as in dimensions as per international Bosch standards of 6mm X 2mm X 600mm (O.D. X I.D. X L). 

The offered pipes are of superior finish quality and come argon welded with hard nipple support that assists in enhancing service life span of the nipples. Further, here these need not be opened from test injector end for testing either type of pumps that safeguards nipples as well as saved from possible damages brought to male thread of test injectors.

Description

• The pipes are suitable for 'A' type pumps with nuts - ( M 12 X 1.5 ) X (M 14 X 1.5) Threads.
• Dimensions are as per international Bosch standards - ( 6mm X 2mm X 600mm )
  (O.D. X I.D.  X   L)

Note: Also available in length 450 mm - (6mm X 2mm X 450mm) for Delphi / Bosch distributor pumps ( Leave a message after purchase if you require the 450 mm L pipes)

• Same pipes can be used to calibrate 'B' type pumps with nuts ( M 14 X 1.5 ) ( M 14 X 1.5 ) Threads, by using conversion adapters to convert from A to B type. 
• These pipes are of excellent quality - Argon welded with hard nipples to enhance the life span of the nipples.
• One need not open the high pressure pipes from the test injector end to test either type of pumps. This helps prevent damage to the male thread of the test injectors

•  
  • Auto advance gauge is used to check the movement of the advance piston in the DPC Rotary Pumps.
  • It has a dual system of measurement, i.e., the travel can be observed either in mm or in degrees.
  • This gauge indicates the advance piston in retard position as well.
  • You can adjust the zero at required RPM as per the Test plan of Delphi by turning the knob of the auto advance gauge clockwise or anticlockwise.
Auto Advance Gauges are recognized for their precision designed finish and construction standards that make these highly suitable for meeting the demands of checking movements of advance piston in DPC Rotary Pumps. Featuring dual system of measurement allowing travel to be observed either in mm or in degrees, it comes with gauge support that assists in indicating advance piston in retard position as well. Further, these also allow adjustment of zero at required RPM as per defined test plan of Delphi through turning knob of auto advance gauge in clockwise as well as in anticlockwise direction.

• Compatible with all kinds of Diesel fuel injection pump test benches / stands.
• Heavy duty flexible coupling provided with 10 No’s spring steel round strips to withstand torsional load of heavy duty fuel injection pumps.
• It has got expandable jaws to accommodate coupling with 12 mm Dog / Claw

• Bosch Injector Kit For Bosch VE Pumps up to 6 cylinders are the diesel injector kits that find suitability for BOSCH Distributor (VE) Pumps of up to six cylinders. These find application for testing as well as calibration of Bosch Distributor (VE) Pumps and are also compatible with all Diesel Fuel Injection Pump Test Stands/ Test benches. Further, for optimum functional support, all injectors also come fitted with genuine Bosch DN 12 SD 12 Nozzles that are preset at 140 BAR opening pressure. The complete kit comprises six Bosch Injectors that come fixed to steel stand with injectors fitted with Bosch DN 12 SD 12 Nozzles that are preset at 140 Bar. 
  
  
  • Diesel injector kit suitable for BOSCH Distributor (VE) Pumps up to six cylinders.
  • Used for testing and calibrating Bosch Distributor (VE) Pumps. 
  • This Injector kit is compatible with all Diesel Fuel Injection Pump Test benches / Test Stands. 
  • All injectors fitted with genuine Bosch DN 12 SD 12 Nozzles preset at 140 BAR opening Pressure.
  
  The complete Kit consists of
  • Six Bosch Injectors fixed to a steel stand as shown in the picture.
  • All injectors fitted with Bosch DN 12 SD 12 Nozzles preset at 140 Bar. 
  • Overflow pipes and output delivery plastic pipes (Blue) with connectors and defoaming dampeners to eliminate froth/foam from the system. 
  • Six high pressure pipes ( 6mm OD and 2mm ID , Length - 450 mm / 18 Inches approx. ) with A type (M 12 X 1.5) and B type (M 14 X 1.5) nuts as per Bosch standard. 

• Diesel injector kit suitable for Delphi / Lucas DPC Rotary Pumps up to six cylinders.
• Used for testing and calibrating Delphi / Lucas DPC rotary pumps. 
• This injector kit is compatible with all Diesel Fuel Injection Pump Test benches / Test Stands. 
• All injectors fitted with genuine Bosch DN 12 SD 12 Nozzles preset at 127 + 3 Bar opening Pressure.
• Manufactured and modified to get the results of Delphi injectors or Hartridge test bench injectors.
• Results can be obtained as per ISO 4008 standards. 

• Six Injectors fixed to a steel stand as shown in the picture.
• All injectors fitted with Bosch DN 12 SD 12 Nozzles preset at 127 + 3 Bar. 
• Overflow pipes and output delivery plastic pipes (Blue) with connectors and defoaming dampeners to eliminate froth/foam from the system. 
• Six high pressure pipes ( 6mm OD and 2mm ID , Length - 450 mm / 18 Inches approx. ) with A type (M 12 X 1.5) and B type (M 14 X 1.5) nuts as per Bosch standard. 

• Injector Part Number : 9430031264
• 12 SD 12 Nozzles Part No : 9430037213

Model: 360 Deg. Rotatable with Diesel FIP Mounting Plate

• Diesel injector kit suitable for BOSCH Distributor (VE) Pumps up to six cylinders.
• Used for testing and calibrating Bosch Distributor (VE) Pumps. 
• This Injector kit is compatible with all Diesel Fuel Injection Pump Test benches / Test Stands. 
• All injectors fitted with genuine Bosch DN 12 SD 12 Nozzles preset at 140 BAR opening Pressure.

• Six Bosch Injectors fixed to a steel stand as shown in the picture.
• All injectors fitted with Bosch DN 12 SD 12 Nozzles preset at 140 Bar. 
• Overflow pipes and output delivery plastic pipes (Blue) with connectors and defoaming dampeners to eliminate froth/foam from the system. 
• Six high pressure pipes ( 6mm OD and 2mm ID , Length - 450 mm / 18 Inches approx. ) with A type (M 12 X 1.5) and B type (M 14 X 1.5) nuts as per Bosch standard. 
• Bosch Injector Part Number : 9430031264
• Bosch 12 SD 12 Nozzles Part No : 9430037213 

• Auto advance gauge is used to check the movement of the advance piston in the DPC Rotary Pumps.
• It has a dual system of measurement, i.e., the travel can be observed either in mm or in degrees.
• This gauge indicates the advance piston in retard position as well.
• You can adjust the zero at required RPM as per the Test plan of Delphi by turning the knob of the auto advance gauge clockwise or anticlockwise.

Set of Six

• The pipes are suitable for 'A' type pumps with nuts - ( M 12 X 1.5 ) X (M 14 X 1.5) Threads.
• Dimensions are as per international Bosch standards - ( 6mm X 2mm X 600mm )
  (O.D. X I.D.  X   L)

• Same pipes can be used to calibrate 'B' type pumps with nuts ( M 14 X 1.5 ) ( M 14 X 1.5 ) Threads, by using conversion adapters to convert from A to B type. 
• These pipes are of excellent quality - Argon welded with hard nipples to enhance the life span of the nipples.
• One need not open the high pressure pipes from the test injector end to test either type of pumps. This helps prevent damage to the male thread of the test injectors.

• Used for testing and calibrating of Inline / P type pumps. 
• These Injectors are compatible with all Diesel Fuel Injection Pump Test benches / Test Stands. 
• All injectors fitted with genuine Bosch DN 12 SD 12 Nozzles preset at 175 Bar +/- 2 Bar opening Pressure. 
• Come with Six high pressure pipes ( 6mm OD and 2mm ID , Length - 450 mm / 18 Inches approx. ) with A type (M 12 X 1.5) and B type (M 14 X 1.5) nuts as per Bosch standard. 
• 100 % Results can be obtained as per Bosch Master Pump i.e. Delivery = 25 cc +/- 0.25 cc when the test bench is set at 500 strokes at 1000 RPM. 
• Made out of special forged steel, heat treated as per Bosch standards.
• Excellent quality and performance assured.

• It is used to check the diaphragm leakage of Inline and VE distributor pumps of all makes including Bosch / Denso etc.
• It can be used to check the movement of diaphragm whose function is to increase the output delivery of the pump when the vehicle is overloaded ( In case of driving uphill etc.)
• Excellent Quality Assured.