Model: 0306

Common Rail electromagnetic and Piezo injectors and CR pumps.
• Multi-functional single-channel simulator for complete testing and calibration of Common Rail injectors and pumps of all makes: Bosch, Delphi, Denso, Siemens, Caterpillar, Cummins etc.
• With the help of any fuel injection test bench, you can professionally test and adjust any Common Rail (electromagnetic and piezoelectric) injector and almost all common rail pumps available on the market today.
• The device checks injectors one by one for the test, using 2 independent pressure regulator channels.
• The test database contains over 2300 test-plans for Common Rail electromagnetic and Piezo injectors and CR pumps.
• Injector coding is supported in Bosch, Denso and Delphi CR injectors (16 digit C2I codes as well as 20 digit C3I coding is supported).
• The unit is inbuilt with electronic digital measuring unit / flow sensors, which automatically measure and display the main supply / output and return / back leak flow of injectors and pumps. The values are automatically compared with the stored test plan values.
• Comes complete with computer and Stardex software for running the Common rail injector and pump tests. Software upgrades are provided free of cost for lifetime.
• User can operate the unit in Automatic mode, Test plan mode and Manual mode as well. Also the user has the capability of creating and adding their own test plan to the computer / software.
• User can print test results or save them as a PDF file on his / her computer.

Model: PSI 777

• The CRDI PSI 777 test bench is a dedicated common rail injector, pump and fuel rail testing bench designed for quickly testing all kinds of common rail injectors, pumps and fuel rails of Bosch, Delphi, Denso and Siemens make (Injectors of both Solenoid and Piezo technology can be tested).
• It is used to diagnose the Faulty Common rail injector by testing it for its spray pattern, Output delivery to back leakage ratio, Full load delivery, Low load delivery etc.
• All test bench controls are through the HMI – Human machine interface touchscreen mounted on the computer. All test bench parameters are controlled and monitored through the HMI. User can set the test bench RPM, number of strokes, start and stop the collection of fuel in the test tubes, drain the test tubes, monitor fuel temperature, monitor inlet fuel pressure, switch on / off fuel supply motor, switch on/off main motor etc., all directly through the HMI touchscreen.
• The test database contains over 2300 test-plans for Common Rail electromagnetic and Piezo injectors and CR pumps.
• Injector coding is supported in Bosch, Denso and Delphi CR injectors (C2I and C3I both are supported).
• The unit is inbuilt with electronic digital measuring unit / flow sensors, which automatically measure and display the main supply / output and return / back leak flow of injectors and pumps. The values are automatically compared with the stored test plan values.
• Comes complete with all software’s for running the Common rail injector and pump tests. Software upgrades are provided free of cost for lifetime.
• Users can operate the unit in Automatic mode, Test plan mode and Manual mode as well. Also, the user has the capability of creating and adding their own test plan to the computer / software.
• Users can print test results or save them as a PDF file on his / her computer.
• Users can also diagnose faulty common rail pumps if they are not developing sufficient pressure / if the solenoid (Fuel metering control valve) on the pump is not functioning well / return flow of the pump is too high. Common Rail Pumps that can be tested include Bosch CP1 / CP2 / CP3, Delphi CRSP, Denso HP0 / HP3 / HP 4 and the Siemens DCP pumps. User can also measure pump fuel return flow with the flow meter mounted on the test bench.
• The user can vary the pressure developed in the system from 0 – 2200 BAR by controlling the percentage opening of the Pressure control valve / solenoid mounted on the fuel rail fitted on this bench.